Osprey SteamCare Compact Steam Cleaner

  • Hidden

Product Description

The Cleaning Challenge: Traditional methods of cleaning can be a time-consuming process.  Cleaning chemicals are not always sufficiently removed from surfaces.  Mops, cloths and buckets can harbour dirt and germs from a previous use which are then further spread on the next cleaning task or pushed into corners, edges and on or around the legs and feet of equipment.  The operator can never be sure that the equipment is completely sanitised and clean before undertaking the next cleaning task and if a chemical is left on surfaces, it can dry hard and trap the dirt.  If surfaces are not cleaned properly, it can lead to a build-up in the grout on floors and walls and within the surface of safety floors as they are not 100% smooth and flat.  Over time this build up will make surfaces slippery and slow to dry.

The Solution: Dry Steam Vapour!

What is Dry Steam Vapour?

Initially the term “dry steam” may sound like a contradiction as steam is a by-product of water and therefore cannot possibly be dry.  This is true of conventional steam, such as that released from a kettle which contains water droplets and is therefore moist.  Dry steam, however, is different.  By applying further heat to conventional steam and increasing the temperature more than 140°C, the remaining water is vaporised thus making the steam “dry”.  It is, therefore, true to say that the hotter the steam, the safer & more efficient the technology becomes!

How does Dry Steam Vapour work?

Dry steam is different to the more traditional methods of cleaning.  In its gaseous state, dry steam vapour penetrates surfaces on contact without causing any damage to the surface being cleaned.  It achieves excellent wetting-out and reaches into all cracks and crevices and the areas hard to reach by more traditional cleaning methods.  The heat saponifies the dirt, grease and grime making them ready for removal which is achieved via micro fibre and the use of an inbuilt vacuum system.

Benefits of the OspreyDeepclean Dry Steam Technology

The standard of “clean” which is made when using dry steam vapour is far higher than can be achieved using more traditional cleaning methods. OspreyDeepclean was the first, & is still the only, company to have conducted an independent, scientifically validated study into the efficacy of dry steam technology specifically with a healthcare patient environment.  This study was approved by the largest research institute in The Netherlands: TNO.  Established in 1932, this independent organisation offered objective and scientifically founded judgements.  OspreyDeepclean worked closely with the scientists, and a study was devised to investigate and validate the safety, suitability & efficacy of dry steam vapour in the daily and periodic cleaning practices within a hospital environment.  The study not only found that dry steam vapour safely removed dirt, grease & grime from the environment but that this was achieved through the safe removal of pathogens and biofilm rather than by killing.  The overall result was a sanitised and pathogen free surface.

Using dry steam vapour to cleanse and sanitise utilises very little water, 1 litre of cold, clean tap water equals approx. 1600 Litres of dry steam vapour! There is no requirement for chemicals as even the toughest grease & grime can be removed with dry steam and the smallest amount of effort by the operator.  This also eliminates the risk of any residue deposits being left on surfaces thus providing immediate health & safety benefits as well as the cost savings on unnecessary chemicals.

As a time-saving benefit, the surfaces are left with minimal residue after cleaning.  This is dependent on the type of surface to be cleaned, but most are left touch dry and ready for immediate use.  Dry steam vapour is also less aggressive than other more commonly used cleaning procedures which in turn means equipment being cleaned regularly has a longer life span and operates more reliably thus delivering even further long term cost savings!

Robust, reliable and tough on grime

The SteamCare Compact is a compact machine, with a robust yet lightweight stainless steel body which is capable of delivering powerful dry steam.

Featuring Simple & clear Start/Stop operation, The SteamCare Compact uniquely doubles as a detail cleaner & steam mopping system to deliver outstanding results—turns an everyday clean into a deep clean!

Cost effective and environmentally friendly – no chemicals required.

Product Code M5006
Power Requirements 230 Volt 50Hz
Max Power 2,200 Watt
Steam 6 Bar Nominal
Boiler Capacity 2.2 Litres
Boiler Material RVS AISI 304
Heat Up Time Approx. 5 minutes
Autonomy Continuous Operation
Detergent Facility No
Detergent Tank n/a
Indicator Yes
Cable Length 4 metres
Machine Dimensions (W x D x H ( in cm)) 40cmx25cmx41.5cm
Net Weight 10.5Kg
Shipping Weight 12Kg
Certification CE, IPX4
Boiler Temp 165°C

At PSS we pride ourselves on our customer service and are happy to offer as much help as needed regardless of the query size.
We have an ethos of providing the best quality products at affordable prices and fully supporting them with our own team of highly skilled and experienced technicians and engineers.

Our Price Promise:
We aim to offer the most competitive price, but if you can buy the same item elsewhere for a better price let us know and we will try to match or better the price.

Demos/Loans:
Picking equipment from a website can be quite a challenge. We can visit your practice, so you can sample our products and discuss your needs with one of our team.

How To Order:
You don’t have to pay now. Many of our customers have accounts open with us as they like to be invoiced later, instead of paying now.

You can order:
Online: You can order online and select the invoicing option that suits you
Email: info@photonsurgicalsystems.co.uk
Phone: 01452 347101

Backorders:
We keep most items in stock and will aim to despatch the next day to you. Pre-owned items will be serviced and checked prior to being shipped as quickly as we can to you. However, special-order items / made to order items may take up to 4 weeks. Once an order is placed a member of our team will be in contact to keep you informed of estimated delivery dates.

Related Products

No results found.
Share This